S2000_Europe

I would like to know if someone had success with the camgears, with other Hondas and brands seems to be very normal use camgears to get better performance.




J

WalkingDrunken

I haven't heard of anyone running aftermarket cam gears unless they have cams to go along with it. Even then The gains seen from cams have been minimal so I would say there wouldn't be any gains. What do others think?

Emil St-Hilaire

Never heard of,or seen cam gears on aF20.
One thing I would like to see again,though,are the lightweight pullies from Rick's.

BigpoppaHurtm

Toda makes some for our car

http://www.todaracing.com/products/honda_s...campulleys.html

I doubt they will be of any use, even with tuning, since our motor is already pretty high strung. But they are reccomended if you use Toda cams.

S2000_Europe

toda cams are worthless, they cost so much and the gains...... none of 1-2 HP


Regards


Juan

SocratesDTC

Why you say that? Even with the Spec-A2 Cams (few diffrences with stock ones) i have seen 5-8hp gains. But with Spec-B or C cams you will see lots of gains. Of course not on a stock motor.

S2000_Europe

Socrates


i have seen any dyno that proves gains

mxt_77

Here ya go.



Of course, you should read this post before you get excited.

To the original poster... I haven't really seen anyone mention using cam gears on an S2000, but greenlight might be using them in his f20c-equipped dragster.

kayvan_pour

damn, that engine is runnign so rich... If he leaned it out from 7-9krpm I bet he could pick up 15+rhwp at redline...

shit if he leaned it out every where he would see great gains....

mxt_77

Both of those were with the stock ECU with no tuning. The purpose there was to show the gains just from the cams. A/F tuning was done later.... and the gains weren't that great, except above 8K RPMs.