White smoke!
#1
Registered User
Thread Starter
Join Date: Mar 2004
Location: High Point
Posts: 2,867
Likes: 0
Received 0 Likes
on
0 Posts
White smoke!
Ok, so the past month occasionally when parking my car in the driveway after backing up I would notice a SLIGHT poof of white smoke coming from the tail pipes. Then this past saturday when parking, i backed up then pulled forward and I noticed enough white smoke coming out of the tail pipe to know that something needs to be done NOW, (I know I should have done something when I saw it the first time but I also suspected that maybe it was just dirt off the gravel driveway). I have noticed my coolant level has dropped a little bit lately too. I do have other factors to take into account while Im asking for help diagnosing the problem. My secondary O2 sensor is bad and also the oil in the car needs to be changed pretty badly. However, can the only conclusion that I should come to is that its the head gasket? If so, I have the Helms manual... how difficult with the right tools and everything should it be to fix in my garage? And also just guestimating how much would it be to have a shop fix it???
#4
Registered User
Thread Starter
Join Date: Mar 2004
Location: High Point
Posts: 2,867
Likes: 0
Received 0 Likes
on
0 Posts
Exactly, and the only spot that could come from would be the head gasket right? And I know its a heavy job, but with the helms manual and all the proper tools is it something that could be done at ones garage? If not, how much should I expect to pay to get it replaced???
#5
I wouldn't hesitate to pull the head by myself but I've also had a lot of experience with Hondas.
If you have a helms and you've done some wrenching, go for it. It's amazing how much of mechanics is just being familiar with metal. I mean, you need to know how it feels when you hand is on the wrench. You have to know if you are reaching the amount of force where the metal will permanently change shape (strip). It also helps to have the right tools... A great set of socket wrenches, open end wrenches and a torque wrench will go a long, long way.
If you have a helms and you've done some wrenching, go for it. It's amazing how much of mechanics is just being familiar with metal. I mean, you need to know how it feels when you hand is on the wrench. You have to know if you are reaching the amount of force where the metal will permanently change shape (strip). It also helps to have the right tools... A great set of socket wrenches, open end wrenches and a torque wrench will go a long, long way.
#6
Originally Posted by bobushka king,Aug 8 2005, 09:04 AM
sounds like a head gasket to me. Unless you know what your doing I'd say bring it to someone as it is a big job.
#7
Registered User
Join Date: Aug 2004
Location: Kufstein
Posts: 4,075
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by glagola1,Aug 8 2005, 09:44 AM
I wouldn't hesitate to pull the head by myself but I've also had a lot of experience with Hondas.
If you have a helms and you've done some wrenching, go for it. It's amazing how much of mechanics is just being familiar with metal. I mean, you need to know how it feels when you hand is on the wrench. You have to know if you are reaching the amount of force where the metal will permanently change shape (strip). It also helps to have the right tools... A great set of socket wrenches, open end wrenches and a torque wrench will go a long, long way.
If you have a helms and you've done some wrenching, go for it. It's amazing how much of mechanics is just being familiar with metal. I mean, you need to know how it feels when you hand is on the wrench. You have to know if you are reaching the amount of force where the metal will permanently change shape (strip). It also helps to have the right tools... A great set of socket wrenches, open end wrenches and a torque wrench will go a long, long way.
Trending Topics
#9
Registered User
Join Date: May 2005
Location: Virginia Beach
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Also, check to see if you have any coolant in your oil...check dipstick or drain the oil. If you do the job yourself, make sure you consult a manual on the correct way to unbolt and re-torque the head. Take the head to a machine shop and they can ensure its true and hasn't been warped. If it is warped, they may be able to mill flat it if its not too bad (i.e. valve clearances). Good luck.