What's The Easiest Way To Replace The Parking Bulb?
10-03-2003, 03:41 PM
#1
Registered User
Thread Starter
What's The Easiest Way To Replace The Parking Bulb?
My front parklight, below the turn signal bulb has burnt. What's the easiest way to replace it. I spent 40 mins cramming my fingers from the factory cut out holes and then from under the wheel and still can't get to it!!!
10-03-2003, 10:38 PM
#3
Join Date: Feb 2002
Location: Costa Mesa
Posts: 2,392
Likes: 0
Received 0 Likes
on
0 Posts
You don't have to remove anything. Turn your wheels out as far as they will go. Pull out the 2 clips nearest the headlight. Pull the plastic liner out and you have access to the rear of the socket. I think you turn it counterclockwise a quarter turn and it will slide out.
10-09-2003, 12:42 PM
#6
Registered User
Join Date: Aug 2003
Location: Chandler, AZ
Posts: 1,856
Likes: 0
Received 0 Likes
on
0 Posts
FYI, I had to do this the other night. The procedure in the manual works okay. I also found it helpful to pull the liner OUTSIDE of the front of the wheel well, where it meets the bumper, to give the liner more room to flex.
And yes, it is a b*tch...
And yes, it is a b*tch...
Trending Topics
10-10-2003, 07:06 AM
#10
Registered User
Join Date: Jul 2002
Location: Highland, NY
Posts: 697
Likes: 0
Received 0 Likes
on
0 Posts
Last time i did it i had to pull a bunch of clips holding the liner in the wheel well and squeeze my hand in there. It was a definate pain in the ass to do and i have to do it again soon because one is blown again. My stupid ass didnt check them 2 days ago when i had my headlights out 
josh
josh