VAFC II
#1
Registered User
Thread Starter
Join Date: Jun 2004
Location: No.VA
Posts: 8,000
Likes: 0
Received 0 Likes
on
0 Posts
VAFC II
so.. i just installed my VAFC II and my car is acting all retarded. its sputtering and is barely driveable. i did not mess with any of the settings and they are all set to zero... can you guys tell me what to do so it willbe back to normal?
thanks!
-dan
thanks!
-dan
#2
Un plug the Vafc From the harness. Also rechck your wiring and double check what wires you spliced into. Sounds liker your car is getting way to much fuel. And if everything is set to 0, that could actully be hurting you in certain areas.
#3
Former Sponsor
Join Date: Jun 2002
Location: Laguna Niguel
Posts: 5,267
Likes: 0
Received 0 Likes
on
0 Posts
Are you sure it everything is initialized and also its set to a 4 cyl car? And of course re check your wiring...are you using a harnes or soldering the conection?
#4
Steps to resolve your problem:
1. Unplug the harness.
2. Buy the plug and play harness
3. Take both parts to someone that knows what they are doing
4. Have car tuned correctly
5. Enjoy the drive
1. Unplug the harness.
2. Buy the plug and play harness
3. Take both parts to someone that knows what they are doing
4. Have car tuned correctly
5. Enjoy the drive
#7
Originally Posted by Aze85,Jan 28 2007, 12:32 PM
. so... wtf.... what should i do
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jun 2004
Location: No.VA
Posts: 8,000
Likes: 0
Received 0 Likes
on
0 Posts
^^ok... i would take it to a tuner, but they are closed on weekends. i have the p&p harness. i just want to get it running so i can take it to get it tuned
#10
Originally Posted by Aze85,Jan 28 2007, 01:04 PM
i jsut disconnected it for the time being until i have time to take it to a tuner