L600MEY

the car is an 00 f20 bog standard!

engine power 209.4bhp
wheel power 146.8bhp
torque 175.6nm

as the car hits v-tech you can hear it come in but on the graph the torque stays at around 160 and doesnt go up im stumped to be honest, any ideas welcome please cheers

loftust

Check your oil levels and air filter.

L600MEY

new filter mate and oil bin changed month and a half ago and levels are good mate

didnt no weather a full out service might help but surely not that much!

iDomN8U

Check the Map sensor

But with the vtec cam engaged, you should see a pretty flat torque curve.

Post the graph

L600MEY

will do asap mate

L600MEY

not the best as my scanner aint working so took a pic
blue line 2nd from bottom is wheel power
next one up is engine power
and the top one is torque

KchaoS2K

milage?

iDomN8U

Pull out the Map sensor, it resides on the throttle body. clean out the contact and plug it back in.

Strange thing is your HP is climbing as if vtec has engaged.

210 bhp = 180ish whp? if so you're engine looks healthy and vtec is engaging because without it you wouldn't see anywhere near those #'s

iDomN8U

Also, do you have an aftermarket ECU?

L600MEY

nope everything standard mate and the wheel brake is only 150 i would be happy if everything ran standard hes had 2 more in and the ran 235bhp-190whp ish