Top down, not all the way
#1
Registered User
Thread Starter
Join Date: Sep 2006
Posts: 2,776
Likes: 0
Received 0 Likes
on
0 Posts
Top down, not all the way
Hey guys, well I recently installed modifrys straps and did the whole office flooring hole fix thing that is supposed to stop wear to the top. I did this about 2k miles ago.
Anyway When i put my top down i hold it till it stops and makes a nice squish noise, but doesnt seem to go down as far as it used to.
Anything I should check out having to do with this problem or take out the rubber stuff in my top?? Thanks
Anyway When i put my top down i hold it till it stops and makes a nice squish noise, but doesnt seem to go down as far as it used to.
Anything I should check out having to do with this problem or take out the rubber stuff in my top?? Thanks
#2
make sure that one of the middle bars is pushed back when it is lowering, mine tends to go forward keeping it from setteling all the way down. So whenever i put the top down i push the bar back to guide it in place.
#4
Registered User
Join Date: Dec 2005
Location: Cary, NC
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
If you've installed Modifry's convertible top fix you've already addressed the issue that drkphnx discribed. The new elastic straps shouldn't be wearing out in only 2,000 miles.
#7
Moderator
That bar that the straps pull on should always be held back by hand when lowering the top. Even the straps don't pull that bar tight enough to allow the top to lower properly.
I teach this to all my customers, so they don't have top issues.
This applies to all s2ks, right up to 2007 cars that are brand new.
I teach this to all my customers, so they don't have top issues.
This applies to all s2ks, right up to 2007 cars that are brand new.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Sep 2006
Posts: 2,776
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Billman250,Jun 20 2007, 06:40 PM
That bar that the straps pull on should always be held back by hand when lowering the top. Even the straps don't pull that bar tight enough to allow the top to lower properly.
I teach this to all my customers, so they don't have top issues.
This applies to all s2ks, right up to 2007 cars that are brand new.
I teach this to all my customers, so they don't have top issues.
This applies to all s2ks, right up to 2007 cars that are brand new.
#9
how low is your soft top going that it isn't low enough for you?
http://www.modifry.com/products/ctf/details.htm
and just out of curiosity... can you explain "office flooring hole fix thing that is supposed to stop wear to the top" i have never heard of this before.
http://www.modifry.com/products/ctf/details.htm
and just out of curiosity... can you explain "office flooring hole fix thing that is supposed to stop wear to the top" i have never heard of this before.