think i broke something in my drivetrain
#23
Thread Starter
i'm stumped... i hope its the driveshaft...then axles if not the driveshaft..then diff if not the axles..
but i've never got around to replacing my own diff... guess it'll be my first =/
but i've never got around to replacing my own diff... guess it'll be my first =/
#25
drain the diff fluid and see if there any metal in it....
but before you do all that, try to replicate the noise again, then start changing the variables:
in gear/not in gear
clutch in or clutch out
forward/reverse
turn left/right
bounce the car in all four corners
then raise the car and start looking under
but before you do all that, try to replicate the noise again, then start changing the variables:
in gear/not in gear
clutch in or clutch out
forward/reverse
turn left/right
bounce the car in all four corners
then raise the car and start looking under
#28
Thread Starter
Originally Posted by Olegator,Nov 22 2009, 05:29 PM
drain the diff fluid and see if there any metal in it....
but before you do all that, try to replicate the noise again, then start changing the variables:
in gear/not in gear
clutch in or clutch out
forward/reverse
turn left/right
bounce the car in all four corners
then raise the car and start looking under
but before you do all that, try to replicate the noise again, then start changing the variables:
in gear/not in gear
clutch in or clutch out
forward/reverse
turn left/right
bounce the car in all four corners
then raise the car and start looking under
i've dont that actually minus the diff fluid drain..
i ran it foward then backwards and i swear it felt like the axle was broke..
how possible that is, i have NO clue. i've never actually seen a broken axle.. meaning.. to the point where it would flop or something...
i'm assuming that the diff wasnt properly broken in since it was new.....a few people driven it kinda hard i suppose, it started making its way loose, then the single clunk started when starting to go forward or reverse and i'm assuming that is the loose pinion trying to get in between the gears and being on top of the tooth then sliding into place, then finally when trying to back up on that hard core hill.. it bit a tooth and broke one off...