Is there a DIY CR lip install?
#21
Thread Starter
Its too late since you already ordered the bolts but I went to Honda when it was time to put mine on and they wanted over $40 just for the 8 front bolts to put the lip on. So I went to O'reillys and got a 100 pack of 10mm bolts for $8 haha. So I have 92 leftover for whatever. But my point is you could save a ton buying hardware from somewhere besides Honda because apparently their bolts are made out of 24k gold.
#22
Registered User
Join Date: Mar 2010
Location: Rogersville, Alabama
Posts: 1,331
Likes: 0
Received 2 Likes
on
2 Posts
I don't remember the exact sizes but they were 10mm bolts, they fit anything on my car that is 10mm stock, so the same size as say a bolt for the fender. Also, i used 4 self tapping screws for the side screws. Sorry if this wasn't much help, it's been like 8 months since I did my install.
#23
Thread Starter
This has been long over due I completed this a long time ago, with all OEM hardware and the premarked circles with X's in them...ENJOY
All I need is a drop...this so far is my favorite mod
All I need is a drop...this so far is my favorite mod
#25
Thread Starter
#26
I think that the CR lip looks off without 17" wheels because 16" looks small with the lip. I'm not kidding or joking. Really it's looks that the CR lip/spoiler have been to be with more wide wheels
#28
Originally Posted by vasquezgno' timestamp='1305543913' post='20579572
i think a cr lip looks off without a wing because of how aggresive it looks but thats just me.
#29
Older thread but does anyone have the OEM part numbers for all the hardware across the bottom of the bumper and the bolts behind the lip?
I'm looking here but am not 100% on which ones I need.
I'm assuming 39,40, and 37?
http://www.hondaautomotiveparts.com/...tcgry5=BUMPERS
I'm looking here but am not 100% on which ones I need.
I'm assuming 39,40, and 37?
http://www.hondaautomotiveparts.com/...tcgry5=BUMPERS
#30
Thread Starter
Older thread but does anyone have the OEM part numbers for all the hardware across the bottom of the bumper and the bolts behind the lip?
I'm looking here but am not 100% on which ones I need.
I'm assuming 39,40, and 37?
http://www.hondaautomotiveparts.com/...tcgry5=BUMPERS
I'm looking here but am not 100% on which ones I need.
I'm assuming 39,40, and 37?
http://www.hondaautomotiveparts.com/...tcgry5=BUMPERS
8 Pcs. of 90140-SD9-000 -- Bolts that through the bumper to the chin
3 Pcs. of 90192-SG0-003 -- Bolts for underneath (Long step, middle 3)
4 Pcs. 90501-SM4-003 -- Bolts for underneath (Short step, outside 4)
5 Pcs. 90222-S04-003 -- Nuts for underneath
2 Pcs. 90306-SF1-000 -- Clip nuts for underneath
4 Pcs. 90103-TA0-000 -- screws to fasten the spoiler to the back of the bumper (wheel wells)
4 Pcs. 90331-S3Y-003 -- Spring nuts for the screws above
most of these the dealer has to order overnight, good luck-Justin