Quick exhaust question
#1
Registered User
Thread Starter
Join Date: May 2004
Location: Romulus, MI
Posts: 1,085
Likes: 0
Received 0 Likes
on
0 Posts
Quick exhaust question
Okay so my invidia finally came i got it yesterday after i get off work, I'm gonna venture home in this god damn rain and pull it in the garage and install. Heres my Q:
After removing the stock exhaust should i bolt the two peices of the invidia toghet before installing or install them both 1 at a time?
Thx, just wanna make the install as quick and easy as possible
After removing the stock exhaust should i bolt the two peices of the invidia toghet before installing or install them both 1 at a time?
Thx, just wanna make the install as quick and easy as possible
#4
When installing exhaust systems, always "temporarily" bolt stuff in place, do a final check and alignment, THEN do the final torquing of all bolts. It's a lot easier to install and align if everything is loose.
#6
Originally Posted by GodoftheBOLP,Aug 4 2004, 09:22 AM
So your saying bolt the two together but only tight enough so that I can still adjust it after installing it on the hangers etc...?
Trending Topics
#8
Don't forget to spray all your old bolts with Liquid Wrench (or WD-40) and the rubber hangers with Silicone spray. Those 3 cat bolts, in particular will need an extra shot and a few minutes to work in. Don't be surprised to hear a lot of gawd awful squeaking when you turn them things, although you may be lucky. If they squeak real bad, turn a bit, spray a bit more, turn a bit more. You don't want to have a busted bolt with your car hanging in the air and no spare to put in.