Question regarding the OEM oil filter...
#1
Registered User
Thread Starter
Join Date: Jul 2007
Location: Sanford/Lake Mary
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
Question regarding the OEM oil filter...
Does anyone know the measurements/diameter of the OEM Honda filter? I don't want to pay $25 for the Honda tool, so I picked up a variety pack from Harbor Freight for $5 which has a few different sizes. I need to make sure one is going to fit before I open the package, and don't have a spare filter here. Thanks for the help guys...
#6
Registered User
Thread Starter
Join Date: Jul 2007
Location: Sanford/Lake Mary
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
My NAPA filter is 80mm. I'm thinking they may be the same. I'm guessing someone on here has a filter from a local parts store that has a number written on it.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jul 2007
Location: Sanford/Lake Mary
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
Thank for the help.
I wondering if the cap is just a hair bigger. One of the filter wrenches that came with the set was 80mm, which is 3.15 inches. I'm thinking this is going work.
Thanks again.
I wondering if the cap is just a hair bigger. One of the filter wrenches that came with the set was 80mm, which is 3.15 inches. I'm thinking this is going work.
Thanks again.
#10
I had no luck with the cap end wrenches. I had several small ones from other cars and I had to go for one of the claw design (giant pliers). The flats and diameter varied significantly from my factory and the gold I used in a pinch (and the store frams for comparison). This claw wrench is really the only way to take off the filters if they are put on right (tight to spec).