question about a particular ground cable
#1
Registered User
Thread Starter
Join Date: Mar 2004
Location: Corona
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
question about a particular ground cable
been piecing my motor back together over the last few months in between days off of school, mostly weekends (bensons sleeved bottom end, portflow head) but i finally got it back together late tonite, and saw that i was missing this ground. does anyone recognize where it should be grounded too? i pulled it up a bit, and now that the valve cover is on i dont see many places close within its reach where i can ground it. and i think its too small in diameter to be grounded on the firewall.
going to add coolant, oil, and gas tomorrow and hopefully start it up. if you recognize it lemme know, if s2ki is down you can email me at simbadogg@gmail.com
thanx guys
- Simba
going to add coolant, oil, and gas tomorrow and hopefully start it up. if you recognize it lemme know, if s2ki is down you can email me at simbadogg@gmail.com
thanx guys
- Simba
#2
I believe that connects to the back of the head under the black harness bracket. It's a pain to connect as there is not much clearance between the head and firewall. Removing the valve cover will help.
#3
Registered User
Thread Starter
Join Date: Mar 2004
Location: Corona
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GoFaassttt,Feb 26 2011, 03:25 AM
I believe that connects to the back of the head under the black harness bracket. It's a pain to connect as there is not much clearance between the head and firewall. Removing the valve cover will help.
Thread
Thread Starter
Forum
Replies
Last Post
SimbaDogg
California - Southern California S2000 Owners
4
02-26-2011 02:55 AM