Only front braided lines OK?
#1
Former Sponsor
Thread Starter
Only front braided lines OK?
does anyone know if it's ok to have only stainless steel braided lines on the front and not the rear?
i stripped a bolt while installing the rears and it seems almost impossible no matter what i do to get it off.
i stripped a bolt while installing the rears and it seems almost impossible no matter what i do to get it off.
#2
Banned
It won't hurt anything...
But get a line wrench for that nut that you stripped...if, and I'm sure that it is, the one that I think you stripped. Line wrenches are closed 3/4 of the way around the nut and provide the maximum contact with the nut...they are also called flare nut wrenches.
But get a line wrench for that nut that you stripped...if, and I'm sure that it is, the one that I think you stripped. Line wrenches are closed 3/4 of the way around the nut and provide the maximum contact with the nut...they are also called flare nut wrenches.
#3
Former Sponsor
Thread Starter
thanks! i'll check that out. but the nut is REALLY stripped, i mean pretty much round half way around. would you happen to know where i could get a line wrench?
#5
It is likely one of those (too) soft fittings in the brake line that I know can be stripped even with the proper flare wrench. If you attack it with a plumbers tool be careful not to destroy it. It will require either replacement of the brake line or cutting and flaring a new fitting and neither will be easy.
#6
Registered User
Join Date: Feb 2001
Location: West Henrietta UPSTATE NY
Posts: 58,680
Likes: 0
Received 1 Like
on
1 Post
Just braided lines on the front is OK, but get the stripped nut fixed!!!
The last thing you would want is to have that thing come off under the incredible pressure of hydraulics and leave you with no brakes on that wheel/part of the system.
Is the S2000 brake system a 2-part?
Part one- Front Left and Back Right, Part two- Front Right Back Left???
The last thing you would want is to have that thing come off under the incredible pressure of hydraulics and leave you with no brakes on that wheel/part of the system.
Is the S2000 brake system a 2-part?
Part one- Front Left and Back Right, Part two- Front Right Back Left???
Trending Topics
#8
Jim, did Honda change it?
Here's what I have researched:
Power assisted 11.8" vented front discs; 11.1" solid rear discs,
4-wheel disk brakes incorporate a anti-lock brake (ABS) system. It consists of 4-speed sensors, one in each wheel. It uses a 3-channel system; each front has it
Here's what I have researched:
Power assisted 11.8" vented front discs; 11.1" solid rear discs,
4-wheel disk brakes incorporate a anti-lock brake (ABS) system. It consists of 4-speed sensors, one in each wheel. It uses a 3-channel system; each front has it
#9
Originally posted by Triple-H
Just braided lines on the front is OK, but get the stripped nut fixed!!!
Just braided lines on the front is OK, but get the stripped nut fixed!!!