one brake rotor hotter than others
#21
Originally Posted by Billman250,Feb 10 2011, 04:40 AM
if you find a stuck rotor, momentarily open the bleeder on the stuck wheel. if it instanly frees up, you have a bad hose on that wheel.
if not, look for the other issues.
if not, look for the other issues.
i dont mean to hijack the thread, but sometimes when i'm slowing down and if i let go the steering wheel the car pulls either to the left or right.
#23
Registered User
Originally Posted by Billman250,Feb 10 2011, 05:40 PM
You can fix it by opening a bleeder on the side of the system with low pressure, while someone holds firmly on the brake.
Trial and error. have someone watch the light with the key on. open bleeder fast and close it. when the pressure equalizes, the guy holding the pedal will feel a small thud in the pedal and the light will go off.
Trial and error. have someone watch the light with the key on. open bleeder fast and close it. when the pressure equalizes, the guy holding the pedal will feel a small thud in the pedal and the light will go off.
#24
Registered User
Thread Starter
Join Date: Jun 2010
Location: Tampa/Kissimmee, FL
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
no problem with you guys that think your hijacking my thread...as long as it stays relevant somewhat i dont care lol...some good information getting passed around in here so thanks to everyone...
#25
Registered User
Originally Posted by Billman250,Feb 10 2011, 05:40 PM
You can fix it by opening a bleeder on the side of the system with low pressure, while someone holds firmly on the brake.
Trial and error. have someone watch the light with the key on. open bleeder fast and close it. when the pressure equalizes, the guy holding the pedal will feel a small thud in the pedal and the light will go off.
Trial and error. have someone watch the light with the key on. open bleeder fast and close it. when the pressure equalizes, the guy holding the pedal will feel a small thud in the pedal and the light will go off.
As for the pads constantly contacting the rotors, I inspected a friend's S2000 and his pads are also contacting the rotors. I guess this is normal?
Thank you for taking the time to help me Billman!
#26
Registered User
I have a similar problem but on a front passenger side wheel...Also noticed that it dusts more than the drivers side wheel.
Car is on a lift, I rotate drivers side front wheel and it rotates for several seconds, then do the same on the passenger side front wheel and it stops in half the time.
Car is on a lift, I rotate drivers side front wheel and it rotates for several seconds, then do the same on the passenger side front wheel and it stops in half the time.
#27
All rotors should be the same temp. Your hot rotor is dragging.
4 things can make pads drag on the rotor when the brakes are not being used, causing it to heat up.
-sticking pads: pads that are tight in the calper bracket, because of rust or bad fit of pad..little filing and some grease will fix
-brake hose: hose is holding hydraulic pressure. i have seen this countless times in the industry, but never on the s2k yet. so this is unlikely.
-caliper slide pins: if one or both of the slide pins are frozen, it will hold the outer pad against the rotor. remove pins, clean rust out, lube with grease
-caliper piston: over time, debris and rust can acumilate in the piston, causing it to stick out. sometimes you can remove the piston, clean it out, and it will be like new. other times moisture will have rusted the piston, and you will need a caliper
TEST: place car on stands, wheels off. hold brake down hard, release.
step out of the car and try to turn rotors by hand. they should turn easily with one hand.
if you find a stuck rotor, momentarily open the bleeder on the stuck wheel. if it instanly frees up, you have a bad hose on that wheel.
if not, look for the other issues.
4 things can make pads drag on the rotor when the brakes are not being used, causing it to heat up.
-sticking pads: pads that are tight in the calper bracket, because of rust or bad fit of pad..little filing and some grease will fix
-brake hose: hose is holding hydraulic pressure. i have seen this countless times in the industry, but never on the s2k yet. so this is unlikely.
-caliper slide pins: if one or both of the slide pins are frozen, it will hold the outer pad against the rotor. remove pins, clean rust out, lube with grease
-caliper piston: over time, debris and rust can acumilate in the piston, causing it to stick out. sometimes you can remove the piston, clean it out, and it will be like new. other times moisture will have rusted the piston, and you will need a caliper
TEST: place car on stands, wheels off. hold brake down hard, release.
step out of the car and try to turn rotors by hand. they should turn easily with one hand.
if you find a stuck rotor, momentarily open the bleeder on the stuck wheel. if it instanly frees up, you have a bad hose on that wheel.
if not, look for the other issues.
Thread
Thread Starter
Forum
Replies
Last Post
MC21
Member S2000 Classifieds and For Sale
0
10-30-2006 02:39 PM
epnfrn
S2000 Under The Hood
7
12-19-2003 08:36 AM
bjohnston
Car and Bike Talk
4
07-19-2002 12:13 PM