New to AP2 seems like revs are hanging...
#1
Registered User
Thread Starter
New to AP2 seems like revs are hanging...
I do't remember the 2001 model I had a couple of years ago doing this but with the 04 I just bought the revs are hanging when shifting, did my 01 do it and I just don't remember or is this a characteristic of the AP2?
Will getting an ECU flash or upgrade from Hondata take care of it?
Will getting an ECU flash or upgrade from Hondata take care of it?
#4
Registered User
Thread Starter
But if I remove the cdv its only a short matter of time before the clutch pressure plate needs to be replaced from what I've been reading, I'm not interested in doing that so I guess I'll get used to the revs hanging a split second when I hit the clutch.
#5
Former Moderator
Nah...I don't think it is all that hard on the clutch pressure plate. I know a ton of guys running without the CDV...one is approaching 100k miles on his ap2 and autoxes the crap out of his car.
Trending Topics
#10
Join Date: Jan 2003
Location: Gods Speed #57 Lemons #77
Posts: 6,337
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by S2Kage,Feb 27 2009, 02:00 PM
CDV = clutch delay valve
the revs hanging are due to heavy flywheel... revs slipping is CDV or bad clutch lol
the revs hanging are due to heavy flywheel... revs slipping is CDV or bad clutch lol
And if you pull the CDV you should not be in AS.