TwistedS2k

I'm taking off my comptech intake and putting back my stock intake. I forgot the steps to put back the stock intake, you know which parts go where, etc... Does anyone have pics of the stock intake when you taking it apart to install the aftermarket intake? I'm talking about the air solenoid and that little piece that goes underneath the big stock intake box with the vaccuum lines coming out of it. Please help, I'm stuck

xviper

You should be able to go to your Comptech installation manual and do it in reverse.

rworne

Hate to be off topic here, but you should have seen what that headline looked like on the main forum page.

Here's a clue: "embly, please help" was missing...

1a-race

http://www.comptechusa.com/store/media/ins...ions/ins071.pdf

TwistedS2k

i've tried the comptech's instruction but it was not helpful at all. I need pics.

rsaeini

here's some suggestions.

-go to your local dealer and pop the hood on one of the cars.

-meet up with a fellow S2K owner that is local to you and check out his/her airbox.

-purchase a service manual. if you don't want to cough up the $75 for one of these you can get the cheap one from pep-boys for like $10, it's not as good but it'll probably help.

1a-race

there are service manuals on ebay on cd for $5

TwistedS2k

i got it!!! Thanks for all the help

Saxo Boy

When I bought my S2000 it had a crappy I.K. on it which I took off. Having never even looked under the hood and not being mechanically minded I still managed to put it all back together as stock. Its totally obvious once you get into it