Need Help with Zeals..
#11
Registered User
Thread Starter
Originally Posted by fly_S2K,Mar 24 2005, 08:51 AM
That's another solution if you do not want to change the spring pre-load.
Although I do not know what the modification consist of.
Although I do not know what the modification consist of.
#12
Registered User
Join Date: Jul 2001
Location: Anaheim, Orange County
Posts: 8,754
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JsAP1,Mar 24 2005, 07:43 AM
I have about 2mm till I hit the lower control arm. I did exactly what you said. I have a 1-2 finger gap in the rear. Heres the thing. I am running a 245/35/18 rear tire on a 18x9 +68 rear. So it looks funny IMO. What do you think? I think thats as low as I can go. I want to lower like my Comptechs 3 inches at least. Anyway to achieve this?
#13
Registered User
Thread Starter
Originally Posted by Asura,Mar 24 2005, 09:27 AM
If it looks funny, then you need wider tires.
#14
Registered User
Originally Posted by JsAP1,Mar 24 2005, 11:26 AM
So your saying if I change the spring load (like you said earlier) that I can go lower? How? I just dont see how at this point. The fronts were fine. Infact they were perfect. The rears are being a pain in the butt.
#15
Originally Posted by JsAP1,Mar 24 2005, 09:25 AM
Yeah its the B6s. Yup thats the same problem I have. I bought them new from my friends shop. I will call Kent this morning.
#16
Registered User
Thread Starter
AJ Pwr also sent me a PM with an alternative and I will try that. That should resolve this issue. Makes sense and I didnt think about it.
Thanks guys.
Thanks guys.
#17
Registered User
Thread Starter
Originally Posted by What The,Mar 24 2005, 08:46 AM
Do you have the the B6's like these?
Zeal B6's
I had these on mine before and ran into the same problem. You can tuck the fronts but the rear nipples would hit the control arm if you go too low.
Did you get these new or used?
After I sold mine, Kent from Endless said there was a mod that they can do to the rears (but you have to send them back) to make you lower them more.
PM JDMwhore, he sent them in and got the mod done. He's dumped on them now.
*edit*
If these are the B6's I don't think you can unlock the top. There is no top perch to move. Check with Kent from Endless.
Hope this helps.
Zeal B6's
I had these on mine before and ran into the same problem. You can tuck the fronts but the rear nipples would hit the control arm if you go too low.
Did you get these new or used?
After I sold mine, Kent from Endless said there was a mod that they can do to the rears (but you have to send them back) to make you lower them more.
PM JDMwhore, he sent them in and got the mod done. He's dumped on them now.
*edit*
If these are the B6's I don't think you can unlock the top. There is no top perch to move. Check with Kent from Endless.
Hope this helps.
I will work on it tonight.
#18
Originally Posted by JsAP1,Mar 24 2005, 01:12 PM
FYI Kent told me I also have a set of the same setup as JDMWhore had redone. So mine are already like his but new and still cant go low enough.
I will work on it tonight.
I will work on it tonight.
What was the alternative?
#20
Registered User
Thread Starter
Well low and behold the rear cannot go lower than 1.75 in the rear which will not do for me. So I swapped out the rears for now. Now its all fixed.
Thanks again guys.
CLOSED
Thanks again guys.
CLOSED
Thread
Thread Starter
Forum
Replies
Last Post
tbkonwso
California - Bay Area S2000 Owners
12
04-21-2012 03:52 PM
RevvHii
S2000 Racing and Competition
23
11-23-2008 02:28 PM