robs2g1

i took everything off from my turbo kit. Basically it was a custom t3/t4 turbo with custom manifold and piping. Ran it on a AEM EMS version 2 tuned by church's. I removed all the turbo stuff, injectors, fuel pump, ecu, spark plugs, o2 sensor, and stock exhaust system.

I'm only missing the cat on the exhaust and the intake. I used a regular intake piping to connect a basic intake on to start up. There is no cat, but the car doesn't seem to start.

The new spark plugs show signs on oil or black substance on them after i tried starting the car for a while. The car would turn over, but no start. Any advice would be greatful or if you know if i don't have a cat on or if the reinstall was wrong somewhere let me know.

Thanks,

Jon To

robs2g1

Need help quick!

Billman250

Cat has nothing to do with it.

Kitz

Is the factory map sensor back in it?

s2k aok

i don't know, dead battery? was the car down for a significant period of time while you were uninstalling everything?

Blindeye_03

Honestly it could be anything but it sort of sounds like an unplugged air sensor. I had a similar experience in my mazdaspeed3 when I forgot to plug it up. Otherwise tear into it again and see whats not plugged in or missing, etc..

robs2g1

Not sure which one that is. All sensor are plugged in and i'm not sure if i have an aftermarket map sensor. Can you show me a picture?


Not the battery because it turns over just fine. Just feels like there no spark.


Just check all the plugs on the throttle body and vtech are.

robs2g1

HELP

blobianco

sounds like you need to go take it to the guy that put your turbo kit on and pay him some more money to make your car stock again!

Jstone_ap2

still running aem map or stock ecu?