need help again =( p1129 and car max out at 55 mph@ 6th gear
#21
Moderator
Is it a new Honda MAP sensor?
I wonder if you wacked it too hard and broke the new one.
You need a MAP sensor, or you have a MAP wiring issue. Acording to the book, you need a MAP sensor. The book is not perfect, but it is saying more or less that the ECU wont cause that code.
I wonder if you wacked it too hard and broke the new one.
You need a MAP sensor, or you have a MAP wiring issue. Acording to the book, you need a MAP sensor. The book is not perfect, but it is saying more or less that the ECU wont cause that code.
#22
Registered User
Thread Starter
Join Date: Dec 2011
Location: skokie
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Is it a new Honda MAP sensor?
I wonder if you wacked it too hard and broke the new one.
You need a MAP sensor, or you have a MAP wiring issue. Acording to the book, you need a MAP sensor. The book is not perfect, but it is saying more or less that the ECU wont cause that code.
I wonder if you wacked it too hard and broke the new one.
You need a MAP sensor, or you have a MAP wiring issue. Acording to the book, you need a MAP sensor. The book is not perfect, but it is saying more or less that the ECU wont cause that code.
#25
Registered User
Thread Starter
Join Date: Dec 2011
Location: skokie
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
ok im going to return the autozone one and order a new map sensor from honda. and im buying that vacuum tank too since its only 15 bucks lol. thanks bill! again. i hope the code will go away after =)
#26
Registered User
Thread Starter
Join Date: Dec 2011
Location: skokie
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
so i returned the autozone map sensor and put the old 1 back in, in the mean time (new 1 on its way). the car ran the same as if the autozone map was in there... no difference.. at alll.
No CEL but theres a p1129 pending..
Idles perfect. range from 1000-1100 rpm. no jumpy rpm no sticking rpm.
i am going to go record a video of my take off problem in a minute.
No CEL but theres a p1129 pending..
Idles perfect. range from 1000-1100 rpm. no jumpy rpm no sticking rpm.
i am going to go record a video of my take off problem in a minute.
#27
Registered User
Thread Starter
Join Date: Dec 2011
Location: skokie
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
[media]http://youtu.be/ldX7aOOFSTI[/media]
look at 1st like 15 seconds and then skip to 50 seconds in. those 2 parts really describe what i am talking about.. and still no CEL just pending p1129 code.
look at 1st like 15 seconds and then skip to 50 seconds in. those 2 parts really describe what i am talking about.. and still no CEL just pending p1129 code.
#28
Registered User
Thread Starter
Join Date: Dec 2011
Location: skokie
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
so i got a voltmeter and tested the map wire. i've read on ehow that close to 5 is good. there are 3 wires. green/red, green/white, and yellow/red. the volts are 4.79,.005,4.99 respectively. ( this is with the ignition on cars off.) i've tried all 3 wires because i didn't know which 1 goes to ecu. this is with the wire unplugged from map sensor.
this means my voltage to the map is fine right? so the only solution is that the mapsensor is bad? any idea?
this means my voltage to the map is fine right? so the only solution is that the mapsensor is bad? any idea?
#29
Registered User
Thread Starter
Join Date: Dec 2011
Location: skokie
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
quick question.. can bad throttle body gasket cause p1129 code? because i heard some hissing sound from the map sensor... i thought it was the map but then i put a drop of water onto the TB gasket it sucked the water in like theres no tomorrow. lol i hope this is it because it would be awesomeeeee