Let's play name that part!(pics included)
#1
Registered User
Thread Starter
Join Date: Aug 2010
Location: West Killadelphia
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Let's play name that part!(pics included)
Don't you hate when you have things 99% assembled and then life throws you a curveball?
I am finishing up my F24C build and went to put the intake manifold on yesterday, when this piece fell out of it or off of it(which is weird, because when I take something apart, I put every single bolt for a specific piece in a labeled ziplock bag and would not have just "laid" this on the intake manifold). So, it is possible it fell out if it, from somewhere when I picked it up, but im not really sure.
Can someone identify this for me?
I put it next to a quarter to see its size:
what the funk is it!? help a brevvva out!
I am finishing up my F24C build and went to put the intake manifold on yesterday, when this piece fell out of it or off of it(which is weird, because when I take something apart, I put every single bolt for a specific piece in a labeled ziplock bag and would not have just "laid" this on the intake manifold). So, it is possible it fell out if it, from somewhere when I picked it up, but im not really sure.
Can someone identify this for me?
I put it next to a quarter to see its size:
what the funk is it!? help a brevvva out!
#3
Registered User
Thread Starter
Join Date: Aug 2010
Location: West Killadelphia
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by topdwnsomyheadfits,Oct 27 2010, 11:04 AM
kinda looks like the metal piece that goes inside the rubber bushings for the intake box? Just a guess
thanks for the input, though!
#4
Registered User
Join Date: Dec 2009
Location: Philthy pa
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
orrrr it kinda reminds me of the dowels that are in b-series motors. The ones that line up the head with the block.....pray to god its not one of those. My buddies uncle "forgot" to put one in and the head shifted slighty during the test drive and one of the nuts on a lifter or rocker i forget which, snapped off and made it bend a valve!
#5
Registered User
Thread Starter
Join Date: Aug 2010
Location: West Killadelphia
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by topdwnsomyheadfits,Oct 27 2010, 12:08 PM
orrrr it kinda reminds me of the dowels that are in b-series motors. The ones that line up the head with the block.....pray to god its not one of those. My buddies uncle "forgot" to put one in and the head shifted slighty during the test drive and one of the nuts on a lifter or rocker i forget which, snapped off and made it bend a valve!
it does show some signs of being "heated" however, there is no specific pattern to it?
There is some blue-ish signs of heat being applied to it in one spot.
#7
Registered User
Thread Starter
Join Date: Aug 2010
Location: West Killadelphia
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by emac0408,Oct 27 2010, 01:10 PM
It may be the spacer that the black plastic cover on the intake manifold uses.
im going to check it tomorrow, thanks for making me feel like im not going insane!!
Trending Topics
#9
Originally Posted by SgtB,Oct 27 2010, 06:23 PM
May be the fuel rail cover spacer that goes inside the rubber grommet. They're prone to falling out.
Number 14
Number 14
#10
Registered User
On a side note, anytime you see that discolored gold coating, it's usually a spacer for a mount of some sort. That coating isn't very strong, so it being in the engine is unlikely.