Latest SpeedCraft Dynos with AEM EMS
#1
Registered User
Thread Starter
Join Date: Aug 2001
Location: Guntersville, AL
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Latest SpeedCraft Dynos with AEM EMS
First, I'd like to thank Todd and Tracy at SpeedCraft for their attention to detail. They meticulously tuned the AEM EMS for drivability and power. I am extremely pleased with the results. The car over produces the stock torque at only 3800 rpm on pump fuel - not to mention 300hp on pump fuel! Here are the dynos:
Race Gas at 0.6 bar
Pump Fuel at 0.6 bar
Finally, here is the air-fuel ratio on pump fuel. This AEM system is awesome - look at how flat Todd was able to get the air-fuel curve!
AFR on Pump Fuel
Race Gas at 0.6 bar
Pump Fuel at 0.6 bar
Finally, here is the air-fuel ratio on pump fuel. This AEM system is awesome - look at how flat Todd was able to get the air-fuel curve!
AFR on Pump Fuel