KIA 4.77 Gears are out of the diff!
#1
Thread Starter
KIA 4.77 Gears are out of the diff!
I picked the front diff up at my local salvage yard for 110 with less than 1000 miles on it.
Taking it apart was easy, took about 1/2 hour to pull it apart.Quick measurements are:
OD: 7.25 inch
ID: 4.25
43 teeth
pinion: 8 inch
I can take picks if some one can host them for me.
Install wont be for a while but I thought I would share.
Taking it apart was easy, took about 1/2 hour to pull it apart.Quick measurements are:
OD: 7.25 inch
ID: 4.25
43 teeth
pinion: 8 inch
I can take picks if some one can host them for me.
Install wont be for a while but I thought I would share.
#4
Thread Starter
Originally posted by marcucci
Did you check the backlash spec before taking it out?
Did you check the backlash spec before taking it out?
I did not plan to do the install myself so it never crossed my mind. Oh well, next time.
Trending Topics
#9
Registered User
Join Date: Dec 2003
Location: Calgary, Alberta, Canada
Posts: 725
Likes: 0
Received 1 Like
on
1 Post
f20kills,
Good job. I've got a front diff sitting in my garage as well. I do have a dial indicator, so I'll make sure to take a few good backlash readings before I remove the ring and pinion.
Chris.
Good job. I've got a front diff sitting in my garage as well. I do have a dial indicator, so I'll make sure to take a few good backlash readings before I remove the ring and pinion.
Chris.