K20 Head and F20c bottom
#1
Registered User
Thread Starter
Join Date: Jul 2006
Location: Cayman Islands
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
K20 Head and F20c bottom
Will a K20 head bolt up to a F20c bottom end with out any problems? i have a head laying around that needs to be rebuilt, and same for the block.. was thinkng of just stroking it.
Thanks
Thanks
#5
I have heard that it is very close, While the F20 head out flows the k20 head stock for stock, they are Very similar, Perhaps the k20 head can be made to flow just as well with head work
I-vtec would be nice on the s2000, giving it alot more power in the midrange where it needs it.
I-vtec would be nice on the s2000, giving it alot more power in the midrange where it needs it.
#7
I know its been done before, Head to head the F20 head flows better. But the k20 head there are a ton more cam/valvetrain options available. But its nothing a little machine work cant fix!
Trending Topics
#8
Registered User
Join Date: Jul 2006
Location: The Antagonist
Posts: 6,418
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TitusS2k,May 17 2007, 06:39 PM
I know its been done before, Head to head the F20 head flows better. But the k20 head there are a ton more cam/valvetrain options available. But its nothing a little machine work cant fix!
#9
Originally Posted by GRUNTS2K,May 17 2007, 02:59 PM
But do the aftermarket valvetrain parts work well for the K20? They sure dont for the F20..or so I've heard..
#10
K20/K24 set ups are amazing... If it would work in the S2k thats the NA setup i would be running. Get some IPS cams supertech valve train. Alaniz head.... Good to go with some ITB's as well!!