How to mount EK fogs on AP1
#11
Thread Starter
actually i got mine from evasive motorsports...an extra $40 bucks might pay off in the end, i hope so....my mounting is actual pretty secure and clean...i used some zip ties to hold the housing together with the bezel for extra support...otherwise i kind of dangles in the bezel.
#12
Registered User
Join Date: Apr 2010
Location: Vallejo/Sacramento, CA
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Heres the DIY:
https://www.s2ki.com/forums/index.php?showt...l=ek+fog+lights
In his post he said he got them from ebay, Therefore I am not sure what brand they are. I think If you go with an OEM or a reputable brand they should sit a little more flush than what the DIY poster has up. I have seen alot of EK fog lights that do sit very flush.
I agree with S2K Sideways, That if you sit down and think about it before you start going at it you will end up with a really good finished product.
Hope this helped
https://www.s2ki.com/forums/index.php?showt...l=ek+fog+lights
In his post he said he got them from ebay, Therefore I am not sure what brand they are. I think If you go with an OEM or a reputable brand they should sit a little more flush than what the DIY poster has up. I have seen alot of EK fog lights that do sit very flush.
I agree with S2K Sideways, That if you sit down and think about it before you start going at it you will end up with a really good finished product.
Hope this helped
#13
Thread Starter
that DIY is helpful , but he doesnt mention how to actually mount the fogs , which is the whole task. This mod is pointless unless you are going to do it the right way cuz it can ruin your bumper and make your S2000 look like a 92 integra with 400k miles on it haha
Thread
Thread Starter
Forum
Replies
Last Post
MyEeek
S2000 Electronics
2
04-18-2016 08:41 AM
Chanh55
S2000 Modifications and Parts
8
09-05-2012 04:46 PM