S2KEvolution

Sorry if this is a repost, but I did tons of searches and couldn't find anything.
I am installing my test pipe right now and I am also installing my ECG 02 Simulator.

I have the 5 wire ECG 02 Simulator and I need to know what pin the Secondary 02 Sensor is? that's the only pin I need to know, and also what color wire would help too. Please help me as soon as you can...
any help would be appreciated.

thanks
Hal

Slows2k

Connector C (31p)The blue connector, pin 15 white/red wire

Punisher

Yup... pin 15 white/red.. you have to cut that wire and splice the O2sim to the wire going into the ECU

Slows2k

Get a 13ohm 10watt resistor and wire it into the O2 heater circuit. Then you won't have to leave a 200$ O2 sensor plugged into the car's harness, in harms way.

S2KEvolution

thanks chris and punisher!!! i appreciate the information.

I just now got got done with it... I accidently cut the wrong wire for the secondary 02 sensor, so it took me longer than it should have.
but now everything is running okay!!!
test pipe with no CEL!!!

thanks again