HELP! Convertible Top Doesn't Work...
#1
HELP! Convertible Top Doesn't Work...
My top just stopped working (won't go up or down) about a month ago, after I had my AEM EMS installed and tuned. After running some tests, we thought it was a defective top switch. So I ordered a new one and installed it today...but the top still wouldn't work.
Anyone have any thoughts on what the problem could be? I'm thinking maybe a busted fuse? Or maybe the top motor??
Thanks.
Anyone have any thoughts on what the problem could be? I'm thinking maybe a busted fuse? Or maybe the top motor??
Thanks.
#5
Did they take out the console when installing wiring? Sounds more like the switch to tell if the brake is on, and I have heard that there is also a speed test for top operation that may be involved.
Trending Topics
#8
Originally posted by cdelena
Did they take out the console when installing wiring? Sounds more like the switch to tell if the brake is on, and I have heard that there is also a speed test for top operation that may be involved.
Did they take out the console when installing wiring? Sounds more like the switch to tell if the brake is on, and I have heard that there is also a speed test for top operation that may be involved.
#9
Registered User
CSI says that the green wire is the most likely suspect, pending DNA analysis. Unless the system believes the handbrake is engaged, there is no alfresco fun allowed.
Does anyone remember if the windows lower if the handbrake is not engaged? As I recall, unless it is, nothng happens at all - no lower of windows, no lowering of top.
Does anyone remember if the windows lower if the handbrake is not engaged? As I recall, unless it is, nothng happens at all - no lower of windows, no lowering of top.
#10
purp check under the console, while you're there I think there's a thread on here about bypassing the parking brake cutout. That comes handy in florida.
I haven't tried it yet
fltsfshr
I haven't tried it yet
fltsfshr