CaymanS2k

can the throw out bearing be changed on the exedy hyper single pressure plate? Mine is really loose, and think its bad.

let me knw if it can be. I have a oem throw out bearing. will it work it it can be changed?

S2KPUDDYDAD

YES, All Honda S2000 throw out bearings are made by Honda. There are no aftermarket bearings being made for our car at this time. Getting the bearing out of the grip of the Exedy PP is a job You will have to put a block of wood under the bearing and use the screws to draw down the PP to the flywheel. The bearing will pop out under the pressure.

Good luck