ASMspec

Well after waiting about 5 days I finally received my Endless 6 pot race brake setup. I can say this is one of the best brake kits out on the market right now and it does seem to fit with my +45 17x7.5 front wheel with no spacer. Thats good news. They are a little bigger than my Spoon 4 piston calipers but not by much. They kinda look just like the Project Mu calipers but they are blue.
I will get pictures up this week. Off come the Spoon/Project Mu setup. Overall there was no need to change my brakes but couldnt pass up the deal on them. The Endless kit retails for $3699. It includes


Endless 6 piston calipers (2)
Endless brakelines
Endless 2 piece slotted rotors (13 inch)
Endless CCR pads ( I got front and rear pads)


I do know Endless is working on a matching 4 piston rear caliper which will hopefully be out soon. As of right now they just have rear rotors and brake pads to match the fronts. Install should be easy. Several hours at most. If I run into problems I will post them up. Anyway like I said pictures will be up soon..

allenheathdj

cool... just bought a set of spoons from ebay.

S2000_Europe

please keep us posted

Juan

tru

hey are you going to sell your current set up?

ASMspec

I sold it already to a mainland owner.

On another note. I also did notice that the Endless calipers weigh less than the Spoon calipers. But the Endless rotors weigh a ton. They are a 13 inch rotor thus weighing twice what the Project Mu SCR Pros weigh. I actually measured last night and from the surface of the Project Mu rotor to the end of the Spoon caliper is exactly 2.25 inches. I also measured the Endless rotor to caliper and it was exactly the same. Granted they are two totally different brake setups and rotor sizes it does look as if it should clear. My clearance with my Black Racing wheels is about 2.5 inches. What I mean by that is that from the rotor to the start of the curve of the spoke is about 2.5 inches. Thus meaning it should fit. We will see. I am going to install tomorrow.

S2000_Europe

I measuse the Oem caliper width and the Brembo (Current set up)

the OEM is 4.5"
The Brembo is 5.5"
Spoon ???
Endless???
Wilwood???

ASMspec

[QUOTE]Originally posted by S2000_Europe
I measuse the Oem caliper width and the Brembo (Current

Dubai

We would like to see some pic of your breaks please

Omran.. Woohooo

ASMspec

Check out the November issue of Import Tuner. I think there should be a couple pics there...

faukengenius

^ just subscribing to your thread for the pictures