DTC jump failed, car dont start up,Need help pleas
#11
Moderator
Originally Posted by japhethwar,Jan 9 2011, 03:46 PM
Guy I hope for your sake you only blew a fuse, never under any circumstances jump anything. If you have a warning light take the car to a reputable mechanic and have it checked.
#13
Registered User
Join Date: Jan 2006
Location: 17 ft below sea level.
Posts: 4,949
Likes: 0
Received 21 Likes
on
16 Posts
Have you checked the fuses in the fuse box in the engine bay?
#46 = 15A = Datalink connector & PGM-F1 main relais.
That may be the one.
Or any of the other ones.
Don't ask me why I'm posting this!
#46 = 15A = Datalink connector & PGM-F1 main relais.
That may be the one.
Or any of the other ones.
Don't ask me why I'm posting this!
#14
Originally Posted by Billman250,Jan 11 2011, 04:47 AM
does the CEL come on with the key on? The CEL is not only good for codes, it checks the state of the ECU power.
Really thanks for your reply, i didnt get a CEL with the key in....the problem is the engine is igniting..sound just normal when you start the S, but the engine cannot start up.....
Is there another fuse related to the ECU/ECM that i can check of, other than the backup fuse under the dash?
Many thanks
#15
Thank you for input guys...I know I shouldnt jump any electrical things under any circumstance...but stupidly i did it....have learned my lesson now......
Any input is appreciate......
Thanks
Any input is appreciate......
Thanks
#18
Originally Posted by 99SH,Jan 11 2011, 06:02 PM
I don't think he verified all fuses are in-tact. This should be your first step.
#20
Originally Posted by Nick.,Jan 12 2011, 05:32 AM
bring your car to a repair shop, i can't believe people try to fix cars via the internet.