Motoxer4life

Do guys have any tips how to remove the 6 allen head bolts that hold the driveshafts on? Most of mine were stripped from the previous car owner and the bolts wont budge with a vicegrip.Sprayed it with a ton of wd-40 and still nothing. Im thinking of notching it out with a dremel then using a flathead screwdriver but do you guys think ill be able to get enough leverage with a flathead? Thanks alot guys this is the only part stopping me from getting the new diff in!

crank

i use a nice vise grip, i dont even bother with using a hex, just grip it with a videgrip and thats all... and i dont care if they get damaged because i replace them all.

hypforlife32

Drop ur stock diff down a on inch or more in the front. It makes it alot easier to remove the driveshaft bolts.

Motoxer4life

Alright thanks guy sim gonna try that tomorrow. I was probly going to have to weld an allen head in the bolts there so stuck on though. Do i just goto the honda dealer to find replacement bolts?

Suzuka_Joe

Go buy a 4" pipe wrench. It alloys pressure as u push.

Worked amazingly on my car. Buy new bolts to reinstall

Motoxer4life

Damn i looked for a 4 inch one and cant find it anywhere? Any specific place you went for yours man?

GyozA

Cut them off with a dremel bit.

Motoxer4life

I could easily cut them off but how do i get the rest of the bolt out of the thread on the trans?

neeman77

I used the hex and a vice grip and got 2 people under there, worked great lol

Seattle2k

stud extractor or vise grip.