DIY snorkel for CAI systems
#1
Registered User
Thread Starter
Join Date: Jul 2006
Location: The Netherlands
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
DIY snorkel for CAI systems
Since the filter is placed in a closed box under the headlight it hasen't got the advantage of direct air while driving, so i grabbed the 90 degree pipe what you can find under your OEM airbox lid, and i created my own "Direct Front Air Duct System" haha well, just look at the pics!
The 90-degree pipe that you can find under the OEM airbox lid
Make a hole the same size as the 90 degree bend, and shove it in.
Hmm fits perfect!
I connected a rod between the plastic wall and the air-duct so it remains in place while driving high-speeds.
As you can see, i made also a rainguard that protect my filter from water falling down on it from above.
The fitler is 100% dry and clean after almost a year of driving ( Also a few times HEAVY rain! )
I only placed the air duct a bit too low so i need to recut the plastic and place the air duct 1 inch higher..
What do you guys think?
The 90-degree pipe that you can find under the OEM airbox lid
Make a hole the same size as the 90 degree bend, and shove it in.
Hmm fits perfect!
I connected a rod between the plastic wall and the air-duct so it remains in place while driving high-speeds.
As you can see, i made also a rainguard that protect my filter from water falling down on it from above.
The fitler is 100% dry and clean after almost a year of driving ( Also a few times HEAVY rain! )
I only placed the air duct a bit too low so i need to recut the plastic and place the air duct 1 inch higher..
What do you guys think?