justcliff

I've spent the past hour searching this site and the rest of the web for a DIY clutch fluid flush, I'm in need of help. I have a limited understanding of mechanics and limited time, so I need pictures, preferably with crayons to show me how this is done exactly. I've read a little about the procedure, but I don't know where the bleeder is... thanks for the help, sorry to post such a dumb question. the link to the DIY fix is not working for me, please help....

I stepped on my clutch to start the car and come home and it hit the floor, after a little pumping, it tightened right back up and I drove home. I have to be at the Police Academy first thing in the morning and I don't want to walk, please help..

Res is full, no leak in engine compartment, checking inside car now...

Leak found where the rod goes in, dripping down on carpet like other posts, hopefully bleeding the clutch and adding fresh fluid will fix my problems... any other advice or direction will be greatly appreciated

Mrfixit687

Bleeding the clutch and adding new fluid wont fix your leaking problem. You have to replace the clutch master cylinder.

justcliff

That very well may be, however I prefer to take the least invasive approach first and rule out problems from that starting point. At any rate I'm no more closer to figuring out how to bleed the system than when I started.

APFueled

you bleed through the slave cylinder
https://www.s2ki.com/forums/index.php?showtopic=270439