DIY brake Bleeding
#121
Registered User
Originally Posted by SgtB,Jun 2 2009, 01:40 PM
The stainless braid does nothing for wall rigidity. It's strictly for impact protection on the track. The problem is that it lets grit into the weave, and that slowly wears out the inner tubing. OEM brake lines have been 100% for decades.
#122
I've tried the gravity method after a Wilwood BBK install and it did not work for me. I followed the procedures step by step after reading the post many times. I then tried the 2 person method on the front (Wilwood BBK), and found massive improvement. I have the car down now and will do a full bleed using the 2 person pump method this weekend. I have no idea why the gravity method didn't work.. maybe the new BBK did not work well with the gravity method. BTW, the stainless lines that came with my BBK (partshelper) had a flexible plastic tubing over the stainless lines to protect it from the elements.
#123
It's my understanding from the rest of the thread that everything needs to be primed first by pumping before gravity bleeding will work. I.E. you can't use this method when replacing lines or calipers.
#125
this honestly was taking way to long, so i pumped the brakes a few times while bending the hose up, no air backed in, cut the time in a fraction of how slow it was going.
morning test drive after an all night at the garage... very nice.
morning test drive after an all night at the garage... very nice.
#126
Registered User
Join Date: Aug 2006
Location: Anaheim, CA
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
im having some trouble bleeding my brakes. i consider myself pretty well experienced in this but i seem to be having some trouble getting the pedal to even feel as good as it did before i switched fluid.
i recently removed my calipers to paint them, and get at them better. i re-installed everything exactly how they were. i began to do the traditional pumping method. i would say i did every corner at least 5 times, in the order the service manual stated. i then tried the gravity bleed, only to find the pedal still felt the same.
im kind of out of ideas at this point. im beginning to wonder if maybe i am not cracking the bleeder enough? fluid did come out slowly during the gravity bleed, but did not flow. it stopped after it flowed about an inch or so into the hose. any ideas?
i recently removed my calipers to paint them, and get at them better. i re-installed everything exactly how they were. i began to do the traditional pumping method. i would say i did every corner at least 5 times, in the order the service manual stated. i then tried the gravity bleed, only to find the pedal still felt the same.
im kind of out of ideas at this point. im beginning to wonder if maybe i am not cracking the bleeder enough? fluid did come out slowly during the gravity bleed, but did not flow. it stopped after it flowed about an inch or so into the hose. any ideas?
#127
Registered User
Join Date: Jul 2002
Location: Intercontinental
Posts: 4,537
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by a_zepeda926,Aug 4 2009, 04:10 PM
im having some trouble bleeding my brakes. i consider myself pretty well experienced in this but i seem to be having some trouble getting the pedal to even feel as good as it did before i switched fluid.
i recently removed my calipers to paint them, and get at them better. i re-installed everything exactly how they were. i began to do the traditional pumping method. i would say i did every corner at least 5 times, in the order the service manual stated. i then tried the gravity bleed, only to find the pedal still felt the same.
im kind of out of ideas at this point. im beginning to wonder if maybe i am not cracking the bleeder enough? fluid did come out slowly during the gravity bleed, but did not flow. it stopped after it flowed about an inch or so into the hose. any ideas?
i recently removed my calipers to paint them, and get at them better. i re-installed everything exactly how they were. i began to do the traditional pumping method. i would say i did every corner at least 5 times, in the order the service manual stated. i then tried the gravity bleed, only to find the pedal still felt the same.
im kind of out of ideas at this point. im beginning to wonder if maybe i am not cracking the bleeder enough? fluid did come out slowly during the gravity bleed, but did not flow. it stopped after it flowed about an inch or so into the hose. any ideas?
#128
Registered User
After driving my buddies ap1 the other day and realizing his pedal feel was much stiffer than mine, I decided to flush/gravity bleed my brakes. I did it in the order on the first page of this thread. Pedal feels the same. Any ideas of what to try now? Went through 2 bottles of fluid to make sure I got it all flushed.
#129
Registered User
Join Date: Aug 2006
Location: Anaheim, CA
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SEVNT4,Aug 5 2009, 12:01 AM
Just a turn or 3 off the bleeder should be fine. It'll look like it's not flowing (because it's going very slowly) but it will take time. Are you alternating different brake fluids with different colors? If you are, you'll see the flow rate much more easily.
#130
Registered User
Switched so SS lines and cracked the RF bleeder to begin this process. 30 min of bleeding and refilling the master cylinder It still had bubbles coming out constantly. The pedal feel is mushy. I then drove it, activated ABS a few times and then bled it using the 2 person method. Didn't see any air bubbles, but the pedal is still mushy...? I'm about to just live with the mushy pedal. (I figured air was getting in around the threads of the bleeder screw, thus was why there was a never ending flow of fluid/air bubbles)