Dipstick popping up?
#1
Registered User
Thread Starter
Join Date: Feb 2004
Location: Austin, TX
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Dipstick popping up?
I have noticed that after I go out driving around in VTEC, and not just cruising, that the dipstick will not be sitting flush against the valve cover anymore. It only comes up about 1/4" and doesn't leak anything out, but I am wondering if this is a problem that anyone else has experienced, and if so, is there a fix?
I was thinking of getting some thicker o-rings to replace the two green stock ones, to increase the grip, and maybe keeping it installed correctly.
Any ideas?
Thanks!
I was thinking of getting some thicker o-rings to replace the two green stock ones, to increase the grip, and maybe keeping it installed correctly.
Any ideas?
Thanks!
#2
Former Moderator
Join Date: Mar 2004
Location: Yorba Linda, CA
Posts: 4,686
Likes: 0
Received 0 Likes
on
0 Posts
this is from excess crank pressure. I just had the same problem and took mine in under warranty. They did a leak down test and found 2 cylinders under 30 and 2 over 40. I have the car back now after getting new piston rings and a full top end gasket kit. You may want to get this checked out. It could also be the pcv valve or a faulty dipstick, but none of this solved my problem. PM me for more info. My car was in the shop for 3 weeks.
#4
Join Date: Jan 2003
Location: Gods Speed #57 Lemons #77
Posts: 6,337
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by 9kFever,Jul 24 2004, 01:43 PM
this is from excess crank pressure. I just had the same problem and took mine in under warranty. They did a leak down test and found 2 cylinders under 30 and 2 over 40. I have the car back now after getting new piston rings and a full top end gasket kit. You may want to get this checked out. It could also be the pcv valve or a faulty dipstick, but none of this solved my problem. PM me for more info. My car was in the shop for 3 weeks.
Did they tell you what caused the ring failure? I have the same problem (popping dipstick) and replacing the PCV valve has not helped. I am going to be pissed if I need new rings on my 14k MY 03 S2000.
#5
Registered User
Join Date: Dec 2003
Location: South Jersey
Posts: 2,432
Likes: 0
Received 0 Likes
on
0 Posts
I've had the same problem since my first oil change on my MY04, so I think the majority of the cars with this problem are not suffering from worn rings. It's just a design flaw of the dipstick.
#6
Former Moderator
Join Date: Mar 2004
Location: Yorba Linda, CA
Posts: 4,686
Likes: 0
Received 0 Likes
on
0 Posts
the didnt say my car ran very strong and even slowly walked away from an MY01 from pre vtec. I would consider getting it checked out. I have the problem ever since i got the car at 11,300 miles
Trending Topics
#10
Registered User
what is crank pressure? I know what oil pressure is, but crank pressure? And when you find the oil dipstick, find where is the crank dipstick is too, Alexf20C.