xrapidx

What would the diff sound like if it was going to start giving problems? I know there could be many answers to this... there are a couple of threads on the clicking sound when reversing, but today my car did this when I was moving forward?

SOHCmyDOHC

can you take a short video clip? Hard to diagnose sounds

RadioZero

probably a CV joint. is your car lowered?

xrapidx

Stock - except for the intake.

Its not loud enough to hear on video - you can also feel it when it happens - difficult to describe. It's a short deep Click-Click-Click-Click, then gone.

Its like the sound described in other threads when reversing on a slight incline, except mine happened going forward.

FASTSIIK

this is what mine sounded like when it took a crap.
http://www.youtube.com/watch?v=7nzOPfRznJw

s2k aok

i think there was a thread somewhere that said that the clicking noise could be remedied by re-torquing the spindle nut. it's the axle nut, 36mm i think, the one that is staked. don't know the torque off hand but for that nut size i imagine it's fairly high. i remember something to do with that nut...

romaniac85

Hey mate, i bet that sound comes up regularly when u reverse or go over a bump while reversing etc?
I had the same problem with mine in OZ. I re-greased the spindle thingy for
$450aud, went back after 2 weeks as the sound came back... replace that nut thingy for like $12aud and the sounds NEVER came back.

Hope i was of help.

Black Betty

i had the same prob, figured it was the CV joint, so i replaced the axle and that sound has yet to show up again.

xrapidx

I'll have someone have a look at it? Spindle nut the correct part to look?

xrapidx

Ok - I've noticed the sound when going forward as well - but only when the car is pulling away, it 'clicks' once or twice - still the spindle nut?