Cr intake fit in an ap1
#1
Registered User
Thread Starter
Join Date: Jan 2008
Location: Austin, Tx
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
Cr intake fit in an ap1
will the cr stock intake fit into a ap1 with no problems im sure it will it seems like it. Just want some feed back before I buy it off this guy.
#2
Former Moderator
It should fit, but there are some minor differences. The part number is different between the non-DBW and the DBW cars.
But why do you want the CR stock intake? It is no different that a non-CR intake. The part number is the same between CR & base.
But why do you want the CR stock intake? It is no different that a non-CR intake. The part number is the same between CR & base.
#3
Registered User
Thread Starter
Join Date: Jan 2008
Location: Austin, Tx
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by negcamber' date='Jan 14 2009, 07:49 PM
It should fit, but there are some minor differences. The part number is different between the non-DBW and the DBW cars.
But why do you want the CR stock intake? It is no different that a non-CR intake. The part number is the same between CR & base.
But why do you want the CR stock intake? It is no different that a non-CR intake. The part number is the same between CR & base.
#4
Former Moderator
Meh...it *should* fit. But it probably won't be identical. The intakes from 00-05 are all perfectly interchangeable. But the 06+ cars have a different part number...so there is a difference. What it is, I can't say...it might be something like a missing bracket, etc.
Either test fit, or try to find another 00-05 intake if you need a stock one.
Either test fit, or try to find another 00-05 intake if you need a stock one.
#6
I want to say that the only difference is a hole on the elbow that connects the box to the throttle body. There is an air temp sensor that I believe is not there on the previous years.
Joaquin
Joaquin