Convertible Top Frame Maintenance
#1
Registered User
Thread Starter
Join Date: Aug 2005
Location: Concord, NC
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Convertible Top Frame Maintenance
Okay, I'm pretty handy and do a real good job of taking care of my S, but tell me what I need to do to maintain the convertible top frame properly? What point should be lubricated? What lubricant is good to use? How often should it be done? My baby is only 2 months old; how long should I wait until the first lubrication for the top?
#2
In the 5 years I've had this car, I've never lubed anything on the top. The only thing you need to do is to treat the rubber seals once or twice a year. The mechanism itself should need no attention.
#3
Registered User
Join Date: Mar 2005
Location: Bethesda
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Ive treated the rubber bits with some silicone (100% if you can get it), and also i have (possibly fruitlessly ) used both white lithium and shin-etsu grease on the various hinge parts.
However, just today when i was putting the top down, it didnt want to go down the whole way, I reclosed it and again tryed to put it down, and was trying to see what was jamming. It did get stuck again but i couldnt see what the problem was. On the third try it worked as it should have.
btw when it did jam, I feel it would have closed if i had continued to hold the button down, but i didnt want to force it.
However, just today when i was putting the top down, it didnt want to go down the whole way, I reclosed it and again tryed to put it down, and was trying to see what was jamming. It did get stuck again but i couldnt see what the problem was. On the third try it worked as it should have.
btw when it did jam, I feel it would have closed if i had continued to hold the button down, but i didnt want to force it.
#4
Registered User
Join Date: Oct 2004
Location: Charlotte, NC
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=tizbad2k,Sep 29 2005, 08:53 PM]Ive treated the rubber bits with some silicone (100% if you can get it), and also i have (possibly fruitlessly ) used both white lithium and shin-etsu grease on the various hinge parts.
#5
Originally Posted by xviper,Sep 29 2005, 10:43 PM
In the 5 years I've had this car, I've never lubed anything on the top. The only thing you need to do is to treat the rubber seals once or twice a year. The mechanism itself should need no attention.
#6
Originally Posted by tizbad2k,Sep 29 2005, 10:53 PM
However, just today when i was putting the top down, it didnt want to go down the whole way, I reclosed it and again tryed to put it down, and was trying to see what was jamming. It did get stuck again but i couldnt see what the problem was. On the third try it worked as it should have.
btw when it did jam, I feel it would have closed if i had continued to hold the button down, but i didnt want to force it.
btw when it did jam, I feel it would have closed if i had continued to hold the button down, but i didnt want to force it.
If it still won't go all the way down, this is a function of weak elastic straps and Honda has a TSB on this.
#7
Registered User
Join Date: Nov 2003
Location: Boston
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
There is a service bulletin #03-023 which outlines a fix for squeaks and pops on the soft top using Shin-Etsu on the rubber gaskets, and spray white lithium grease on the frame.
I believe it is to address complaints rather than a general maintenance procedure.
Regards,
BD
I believe it is to address complaints rather than a general maintenance procedure.
Regards,
BD
Trending Topics
#8
#9
Registered User
Join Date: Mar 2005
Location: Bethesda
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by xviper,Sep 30 2005, 10:17 AM
Holding the button down and using the top motors to close or open the top is not "forcing" it. That's what it's for. You can hold that button forever if you like. It'll stop when it gets to the end limit and disconnect. It will not continue to "close" or "open" the top. If you are trying to release the button at the exact moment you think the top has reached it full travel, this is a pretty goofy and superstitious way of doing it. Just hold it till it stops.
If it still won't go all the way down, this is a function of weak elastic straps and Honda has a TSB on this.
If it still won't go all the way down, this is a function of weak elastic straps and Honda has a TSB on this.
anyways, i dont think its good operational practice to make a motor run when something is resisiting it more than usual. In my case there was atleast 6 more inches of travel when it jammed.
#10
Originally Posted by tizbad2k,Sep 30 2005, 09:27 PM
anyways, i dont think its good operational practice to make a motor run when something is resisiting it more than usual. In my case there was atleast 6 more inches of travel when it jammed.