Clutch Problem
#1
Registered User
Thread Starter
Join Date: Dec 2004
Location: Houston, Texas
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
Clutch Problem
I changed my clutch mid last month, and now that it's worn in I've been pushing the car into VTEC and generally driving it like it was meant to be driven. I've noticed that during hard acceleration my clutch pedal starts dropping to the floor, and when I shift, the pedal is really close to the floor. This doesn't happen during slow accelerations / when the car I'm not on the gas much. At one point I was accelerating in 1st gear to red line and the pedal dropped all the way to the floor and wouldn't come back up, I found out that the release fork fell out. After putting the release fork back in and pushing it all the way in as far as I felt it could go, I tested it again and it seemed like the problem was solved for a while.
It's been ~200 miles since the fix and I noticed the pedal starting to drop again. I don't want to get to the point where the pedal drops to the floor again but I'm stumped at what might be causing this. Am I just not inserting the release fork all the way in or putting it in incorrectly? Any advice / insight would be appreciated.
It's been ~200 miles since the fix and I noticed the pedal starting to drop again. I don't want to get to the point where the pedal drops to the floor again but I'm stumped at what might be causing this. Am I just not inserting the release fork all the way in or putting it in incorrectly? Any advice / insight would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
s2kdriver80
S2000 Under The Hood
8
06-05-2012 02:28 PM
Saki GT
S2000 Under The Hood
2
10-21-2010 11:53 AM
crxican
S2000 Under The Hood
46
11-12-2007 05:08 AM