Originally Posted by Cristian Tita

had the exact same issue, no squeaking or anything, would stick down low, would be better after spirited driving.. but didnt last.
did the slave cylinder rod polish and grease but didnt help.

what did help was Billman's advice:
Fork tips need grease where they contact the TO bearing. Not easy to get at, but you can reach in there with a coat hanger and dab grease on each tip.

Unbolt slave and remove boot of course, then disengage fork and grease it.

this might not be a permanent solution. i had this done once, it was good for about a month or so then turned to crap again.
i had the mechanic do it again this time with high temp urea grease and it's been running smooth for about a month now. fingers crossed it stays like this.

i'd say try it and see how long it lasts. reading the forum it seems it works for good for some and temporarily for others.
still worth doing before dropping the transmission.

cost me 40 bucks at a mechanic but its a DIY if you have basic tools and a way to lift it.

good luck man!

Cristian