EndlessAutosport

I need a new cluster for my 2006 S2k and I'm curious if I HAVE to use an AP2 cluster or if a AP1 cluster will work? If the AP1 will work, what features/things will I lose? I figured the redline would be different obviously, but wasn't sure if there were any other tradeoffs.

Also...I've had an airbag light we can't get rid of and in order to register the car I need to get rid of it...Any suggestions on where to start diagnosing? I've never done anything with diagnosing airbags so I'm a little at a loss as where to start. Thanks guys!

jpark

clock

EndlessAutosport

I'll lose the clock feature?

Pinky

Yupp. No clock within an AP1. Hell my '00 didn't even have a clock on the radio! It was devoid of all things that were not essential!

EndlessAutosport

Thanks! If the only thing I will lose is the clock then I'm not worried....I just wanted to make sure the AP1 one will work.

Blindeye_03

I thought 01 and up had clocks....?

afzan

assuming it'll even work - you'll also lose outside temperature

s2klariat

I have an 01 and no clock. Have to use my phone to check the time

SoREALemjay

I'm so used to not having a clock, I always check my phone. Useless feature

Krenath

2006+ cars also use the CAN bus (car area network) to transmit engine temp data to the temp bars on the dash.
You'd probably have to replace your temp sensor with an earlier model and run a new wire to the AP1 gauge