Car Pops when Idling
#11
what do you mean you're not throwing any CEL only for your intake? Maybe you have multiple codes that are in the ECU but you seem to think it's because of the intake. Go get the codes read. If you think it's the intake, why don't you fix it to see if the CEL goes away? I hate to be in your shoes right now buddy but good luck
#14
Originally Posted by hypforlife32,Jul 27 2010, 09:56 PM
do you have a video at all that you can post up??
i knot a bad coil would cause a misfire and that would make the car run like a wrx and feel super slow.
i bad injector wouldnt pop i dont think because you wouldnt be getting enough fuel to push extra fuel through the motor to combust giving you a pop.
bad retainers would drop a valve causing one to be bent/drop... it wouldnt be drivable.
dropped valve would not be drivable at all.
im just throwing a few ideas out there.
i knot a bad coil would cause a misfire and that would make the car run like a wrx and feel super slow.
i bad injector wouldnt pop i dont think because you wouldnt be getting enough fuel to push extra fuel through the motor to combust giving you a pop.
bad retainers would drop a valve causing one to be bent/drop... it wouldnt be drivable.
dropped valve would not be drivable at all.
im just throwing a few ideas out there.
to be on the safe side, i did a compression test, leakdown test, valve adjustment, retainer inspection etc...turned out to be bad fuel injectors...
#15
Registered User
Thread Starter
Join Date: May 2010
Location: Plano, Tx
Posts: 578
Likes: 0
Received 0 Likes
on
0 Posts
ok just got back from autozone had 2 cel codes
1.)p0410
for the intake
New to Me.(After Installing The test pipe.)
2.)p1399
Random cylinder misfire
Blocked EGR passage
Valve clearance out of range
1.)p0410
for the intake
New to Me.(After Installing The test pipe.)
2.)p1399
Random cylinder misfire
Blocked EGR passage
Valve clearance out of range