S2000 Under The Hood S2000 Technical and Mechanical discussions.

blown axle?

Thread Tools
 
Old 03-04-2012, 06:18 PM
  #1  
Registered User

Thread Starter
 
Ilike2DRIFT's Avatar
 
Join Date: Oct 2004
Posts: 633
Likes: 0
Received 0 Likes on 0 Posts
Default blown axle?

My problem started out with a bad rear wheel bearing. (play in the wheel when checked off the ground) I took off the spindle ordered a new honda bearing and had it pressed in at a local shop. I also installed a new hub.


At that time when i had everything apart i also swapped the CV joints, installed adjustable toe arms, diff spacers, Hasport diff mounts and coilovers. (My diff was fine before i replaced all these parts)


I took the car out for a drive after all parts were installed and there is this horrible banging coming from the rear end. I drove the car back in the garage, took off the wheels and made sure everything was tightened. I put the wheels back on and inspected the play on the side i replaced the wheel bearing. There is no play side to side. There is a slight amount of play top to bottom.


Then i drained the diff fluid to look for metal shavings, there were none.

The sound is coming from the side where i replaced the wheel bearing. Could the bearing have been pressed in wrong? Does the outer CV joints go bad ever?

I took a video of it while i was out driving it for the first time.


Turn your volume up!

Old 03-04-2012, 06:48 PM
  #2  
Registered User
 
Sceanzo's Avatar
 
Join Date: Jan 2012
Location: Wilmington, NC
Posts: 213
Likes: 0
Received 2 Likes on 2 Posts
Default

Is the play top to bottom coming from the wheel bearing or the ball joints?

With the wheel in the air. Have a friend shake the wheel and watch for.movement at the ballpoints.

If its coming from the bearing it sounds like they installed it incorrectly
Old 03-04-2012, 07:49 PM
  #3  
Registered User

Thread Starter
 
Ilike2DRIFT's Avatar
 
Join Date: Oct 2004
Posts: 633
Likes: 0
Received 0 Likes on 0 Posts
Default

Play in the wheel, when the car is off the ground, is from top to bottom. It maybe wiggles like 1mm.
Old 03-06-2012, 06:18 AM
  #4  
Registered User

Thread Starter
 
Ilike2DRIFT's Avatar
 
Join Date: Oct 2004
Posts: 633
Likes: 0
Received 0 Likes on 0 Posts
Default

Help!!!!!!
Old 03-06-2012, 06:59 AM
  #5  
Registered User

 
speedjunky01's Avatar
 
Join Date: Mar 2010
Location: lakes region NH
Posts: 910
Likes: 0
Received 3 Likes on 3 Posts
Default

I blew my DS axle

50 bucks at autozone and about a 3 hour job at most

the inside of the DS cup it cracked and made the same noise as yours



but mine couldnt accelerate AT all like 3mph drive home LOL
Old 03-06-2012, 10:50 AM
  #6  
Registered User

Thread Starter
 
Ilike2DRIFT's Avatar
 
Join Date: Oct 2004
Posts: 633
Likes: 0
Received 0 Likes on 0 Posts
Default

That is in the outer CV joint right?
I've never seen that before! Looks like i'm taking apart my car again tonight and inspecting that now. Thank you very much for posting that!
Old 03-06-2012, 12:28 PM
  #7  
Registered User

 
speedjunky01's Avatar
 
Join Date: Mar 2010
Location: lakes region NH
Posts: 910
Likes: 0
Received 3 Likes on 3 Posts
Default

It was the inner one for me the closer to the diff one

What happens when you don't rev it enough to spin the tires
Old 03-06-2012, 01:01 PM
  #8  
Registered User

Thread Starter
 
Ilike2DRIFT's Avatar
 
Join Date: Oct 2004
Posts: 633
Likes: 0
Received 0 Likes on 0 Posts
Default

So did you just order that one part from autozone? or did u have to buy a re manufactured axle?
Old 03-06-2012, 01:14 PM
  #9  
Registered User

 
speedjunky01's Avatar
 
Join Date: Mar 2010
Location: lakes region NH
Posts: 910
Likes: 0
Received 3 Likes on 3 Posts
Default

Reman axle since it no longer fit tight around the splines it just ate them lol.
You get a lifetime warranty with them I've traded 6 sets of axles in now with the turbo civic no questions asked lmao.

At first I thought it was the diff got a ap2 diff for a STEAL at 250 bucks but didn't fix it. Checked the axles and that's what I found.
Old 03-07-2012, 07:52 PM
  #10  
Registered User

Thread Starter
 
Ilike2DRIFT's Avatar
 
Join Date: Oct 2004
Posts: 633
Likes: 0
Received 0 Likes on 0 Posts
Default

So i de-greased and inspected all the parts. There was no cracks in any of the metal. I did notice there was some slight play in the outer part of the axle. It moves in and out about 1mm. I took a video of the play in the outer portion and was wondering if this is normal....





Quick Reply: blown axle?



All times are GMT -8. The time now is 01:54 AM.