S2000 Under The Hood S2000 Technical and Mechanical discussions.

Blinking CEL 1399 and 301, 302 303 304

Thread Tools
 
Old 10-27-2007, 09:37 AM
  #1  
Registered User

Thread Starter
 
jojipoji's Avatar
 
Join Date: Aug 2002
Location: West Hartford, CT
Posts: 1,642
Likes: 0
Received 0 Likes on 0 Posts
Default Blinking CEL 1399 and 301, 302 303 304

Okay I had the blinking cel, searched and figured that, 1. Id use injector cleaner, change my plugs and finally change my injectors. The injectors I swapped out were dirty as heck. The o-rings had massive black oil gunk and when I looked where the injectors came out of, it was oily there too.

The cel came back on with codes 0300, 0302, 0304, 1399.

Before they were 0300, 0301, 0302, 0303, 0304 and 1399. Im assuming that the problem obviously lies elsewhere.

any other ideas
Old 10-27-2007, 11:01 AM
  #2  

 
S2oooNvegas's Avatar
 
Join Date: Sep 2003
Location: las vegas
Posts: 3,361
Likes: 0
Received 0 Likes on 0 Posts
Default

so the miss didnt start till the injector cleaner? or it started then you tried the injector cleaner? let me know.
Old 10-27-2007, 12:04 PM
  #3  
Registered User

Thread Starter
 
jojipoji's Avatar
 
Join Date: Aug 2002
Location: West Hartford, CT
Posts: 1,642
Likes: 0
Received 0 Likes on 0 Posts
Default

No the misfiring started, then i started using injector cleaner, changed the plugs, then I swapped used injectors. The injectors I took out were really dirty. The injectors I put in seemed pretty clean (came off of a car with 25k)-or so the buyer says. Any ideas?
Old 10-27-2007, 04:50 PM
  #4  
Former Moderator
Former Moderator
 
Slows2k's Avatar
 
Join Date: Sep 2002
Location: Mother F'in TN
Posts: 44,287
Received 352 Likes on 321 Posts
Default

It's not the injectors or plugs.

Possible bent valves, bad coil pack(s), Low fuel pressure, bad PCM.. There are many possibilities.
Old 10-28-2007, 06:59 AM
  #5  

 
S2oooNvegas's Avatar
 
Join Date: Sep 2003
Location: las vegas
Posts: 3,361
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Slows2k,Oct 27 2007, 05:50 PM
It's not the injectors or plugs.

Possible bent valves, bad coil pack(s), Low fuel pressure, bad PCM.. There are many possibilities.
Old 10-28-2007, 08:43 AM
  #6  
Registered User
 
joey1320's Avatar
 
Join Date: Oct 2007
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Default

misifires are not that dificult to pinpoint...

have you checked for spark? are all 4 plugs firing?

have you checked your fuel pressure?

have you done a compression test?

check those 3 items and report back, good luck!
Old 10-28-2007, 09:26 AM
  #7  
Registered User

 
ShocK's Avatar
 
Join Date: Jun 2006
Location: Lexington, Ky
Posts: 2,540
Likes: 0
Received 0 Likes on 0 Posts
Default

Coil packs or ECU, I'd check them respectively.
Old 10-28-2007, 10:22 AM
  #8  
Registered User
 
R3DS2K's Avatar
 
Join Date: Sep 2006
Posts: 2,330
Likes: 0
Received 0 Likes on 0 Posts
Default

start with a compression test.. if you google those codes or search on any honda site .. alot of people bend valves
Old 11-06-2007, 06:59 PM
  #9  
Registered User

Thread Starter
 
jojipoji's Avatar
 
Join Date: Aug 2002
Location: West Hartford, CT
Posts: 1,642
Likes: 0
Received 0 Likes on 0 Posts
Default

Update.

I moved the coils around and same codes. Whats interesting is here is the order of the codes that show up.

1. 1399
2. 0302 (about 5 minutes later)
3. After a few hours of driving 0301, 0303, 0304 and 0300

If I start the car and just drive the cel doesnt come on. When I idle and give the gas (up to 1500 rpms) the cel doesnt come on either. I could drive 200 miles and no cel. Yet as soon as I let it sit and idle the cel will come on and then eventually blink. Any suggestions? I guess a compression check next then a meeting with billman.
Old 11-06-2007, 07:04 PM
  #10  
Former Moderator
Former Moderator
 
Slows2k's Avatar
 
Join Date: Sep 2002
Location: Mother F'in TN
Posts: 44,287
Received 352 Likes on 321 Posts
Default

Billman can figure it out for ya.


Quick Reply: Blinking CEL 1399 and 301, 302 303 304



All times are GMT -8. The time now is 12:31 AM.