ans2k

i was wondering if anyone with the ap2 and the cf snorkel intake has any problem getting the snorkel in and out easily. i have read that in the ap1 they can get it in and out under 5 min, and it takes me a while to do it.

thanks

alan

iLuveketchup

Bump.. wondering if the spoon snorkel will fit the AP2 also.

ans2k

hey we have the same type of car, ss/br, but yes it will fit and depending which one you get. the aus2000 will fit with ease but the spoon, and j's might be a pain in the a$$. for the spoon and j's, there is a black bar that sits behind the bumper. you have to remove that and its bracket. and you still might have a hard time getting it b/t the bumper support and the radiator bracket but it will go in.

after all that trouble, i think is the best mod i have, no more bogging at the redlights or stop signs.

iLuveketchup

Thanks ans2k!! Where did you get the aus2000 snorkel?

Randizzle88

For the ap2 there is a support bar you have to remove

ans2k

iLuveketchup, i dont know the site off my head but look up aus s2000 snorkel

Muz

I bought the snorkle molds off aus2000. He no longer makes them.

iLuveketchup

Muz, do you have any in stock for the AP2?

ans2k

http://www.prestigeautoaccessories.com/sto...products_id=132

http://www.aj-racing.com/catalog/product.p...&cat=106&page=1

http://www.aj-racing.com/catalog/product.p...&cat=106&page=2

these are your top picks or you could go with a knock off but be careful if you do.

Seattle2k

nrg innovations also makes a snorkle. I'm hoping to have a dealer account w/ them soon =)