Anyone has diff dimensions
#5
Originally Posted by Trip' date='Feb 12 2005, 01:33 PM
i don't have my car at hand.. its at the mechanic
maybe there is someone who has a diff out for repairs or upgrading it
maybe there is someone who has a diff out for repairs or upgrading it
#6
Registered User
Join Date: May 2002
Location: Washington State
Posts: 3,178
Likes: 0
Received 0 Likes
on
0 Posts
I have a brand new '04 sitting in my garage that I plan to take appart tomorrow to have the parts cryo'ed. I'll measure before I take it apart and post the dimensions. Could you be a little more specific on the measurements you want?
#7
Moderator
I'm headed to the shop now, I have an 04 dif on the bench.
A demension....OD of the dif flanges
B...overall length, or mounting face of the studs to the drive flange face?
c....overall height?
What is you +/- accuracy preference...PMed you my number, ring me if you like...
A demension....OD of the dif flanges
B...overall length, or mounting face of the studs to the drive flange face?
c....overall height?
What is you +/- accuracy preference...PMed you my number, ring me if you like...
Trending Topics
#8
Registered User
Thread Starter
Join Date: May 2004
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
What am looking for is finding out other diffs that can withstand more abuse then the S diff. I do not need accurate measurements, just to find other diffs with roughly the same size.
Another question would be what is the maximum size an S can handle without modding fuel tank or any other stuff down there.
Here is in more detail of what i need
"C" is from top to bottom length (diameter). Hope am clear
Since the diff is a very delicate on our cars, i would suggest to all the FI guys, to help as one community to get an ultimate diff replacement in our cars. Financially feasible too
Another question would be what is the maximum size an S can handle without modding fuel tank or any other stuff down there.
Here is in more detail of what i need
"C" is from top to bottom length (diameter). Hope am clear
Since the diff is a very delicate on our cars, i would suggest to all the FI guys, to help as one community to get an ultimate diff replacement in our cars. Financially feasible too
#9
Moderator
-"A" demension, outside of the halfshaft drive flanges, first pic......10.812
-Length of dif unit from the driveshaft flange face, to mounting face in the back, base of the studs.....14.500
-C demension, overall height as dif sits in the car, from jackpoint face to top of housing...9.062
-Length of dif unit from the driveshaft flange face, to mounting face in the back, base of the studs.....14.500
-C demension, overall height as dif sits in the car, from jackpoint face to top of housing...9.062
Thread
Thread Starter
Forum
Replies
Last Post