2004 Honda S2000 high rpm issue (F20C)
#11
If you unbolt your MAP sensor you can attach a long tube and connect it to a pressure/vacuum source and watch the readings in the AEM software.
Don't start the car just turn ignition on, should be easy to see if signal is linear and behave correctly.
Don't start the car just turn ignition on, should be easy to see if signal is linear and behave correctly.
The following 2 users liked this post by flanders:
noodels (07-30-2024),
Slowcrash_101 (07-31-2024)
Thread
Thread Starter
Forum
Replies
Last Post