1st gear grinding...
#1
Registered User
Thread Starter
1st gear grinding...
Hey everyone, maybe someone can give me some insight on a possible fix to my problem. Lately within the last 2-3 weeks I've noticed 1st gear grinding pretty bad but only above 6K RPM's. All the other gears above 6K RPM's are fine. Under 'normal' driving conditions the car is not problematic through all gears. I've had my 2nd and 3rd gear synchros replaced about 6 months ago so I'm not sure if thats relevant. I have no modifications to the car and its an 02' with about 56K on the odometer. Has anyone ever had this problem? Thanks. By the way the car was warmed up before hand.
#3
Registered User
Thread Starter
No I haven't tried down shifting into 1st. I don't want to make anything worse than it is. Basically from a roll in 1st above 6k it grinds. Even slowly accelerating above 6k then shifting, it grinds. Any other time its all gravy.
Trending Topics
#8
Registered User
Join Date: Mar 2006
Location: Kansas City
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JDMQuip' date='Mar 26 2007, 01:26 PM
I've had my 2nd and 3rd gear synchros replaced about 6 months ago so I'm not sure if thats relevant. I have no modifications to the car and its an 02' with about 56K on the odometer.
But if that was the case I would have expected these problems to appear almost immediately after the 2nd and 3rd synchros were replaced.
Do any of your gears feel notchy once the car is warmed up? Do you have a hard time getting the car into first gear from a stop? I'm kind of thinking that the clutch might not be fully disengaging causing the grinding. If this isn't the case then I'm out of ideas.
#9
Registered User
Thread Starter
Originally Posted by 90crvtec' date='Mar 26 2007, 01:55 PM
Do any of your gears feel notchy once the car is warmed up? Do you have a hard time getting the car into first gear from a stop? I'm kind of thinking that the clutch might not be fully disengaging causing the grinding. If this isn't the case then I'm out of ideas.
#10
Wouldn't it be a second gear grind than? If you just had your synchro's replaced in 2nd and 3rd, I would think improperly installed. If the clutch were not fully disengaging it would effect all gears, right? Take it back where you had fixed and show it to them.