[Update] Hydrolock status
08-19-2014, 04:03 PM
#1
Registered User
Thread Starter
[Update] Hydrolock status
Previous Post: Need Hydrolock Info
Took everything apart. Checked the rods, no bends, and pistons came up all level. Removed the head and sent it to machine shop. Turns out two intake valves were bent and headgasket might've had some issue but can't tell. Anyhow, head is getting machined and supertech everything is going on (might as well). Question is, is it worth buying a complete gasket set or just the main ones like head-gasket, intake and exhaust manifold gaskets, valve-cover gasket set, and new head bolts. Thanks for any info!
Took everything apart. Checked the rods, no bends, and pistons came up all level. Removed the head and sent it to machine shop. Turns out two intake valves were bent and headgasket might've had some issue but can't tell. Anyhow, head is getting machined and supertech everything is going on (might as well). Question is, is it worth buying a complete gasket set or just the main ones like head-gasket, intake and exhaust manifold gaskets, valve-cover gasket set, and new head bolts. Thanks for any info!
Thread
Thread Starter
Forum
Replies
Last Post