What was your MY04 alignment from the factory
#1
Registered User
Thread Starter
Join Date: Jan 2004
Location: SF, California
Posts: 3,759
Likes: 0
Received 0 Likes
on
0 Posts
What was your MY04 alignment from the factory
OK all you MY04 owners who've had the alignment done......what was your specs coming out of the factory......So here's my before specs
Front Left
Camber -0.3
Caster 6.0
Toe -0.05
Front Right
Camber -0.6
Caster 5.8
Toe -0.28
Rear Left
Camber -1.1
Toe 0.9
Rear Right
Camber -1.8
Toe 0.11
Funny that only three values were within factor specs......
Had the alignment done today and the car is feels much more responsive. (although my alignment values are out of spec too)
Anybody else get stock allignment specs off the wall when the alignment was done?
BTW 100% stock, no drop, new wheels, or anything
Front Left
Camber -0.3
Caster 6.0
Toe -0.05
Front Right
Camber -0.6
Caster 5.8
Toe -0.28
Rear Left
Camber -1.1
Toe 0.9
Rear Right
Camber -1.8
Toe 0.11
Funny that only three values were within factor specs......
Had the alignment done today and the car is feels much more responsive. (although my alignment values are out of spec too)
Anybody else get stock allignment specs off the wall when the alignment was done?
BTW 100% stock, no drop, new wheels, or anything
#2
Registered User
Join Date: May 2004
Location: Fair Oaks
Posts: 912
Likes: 0
Received 0 Likes
on
0 Posts
I too am hoping for some response to this thread. I have not myet taken my new (500 mi.)S2K in for an alignment, but will do so soon.
I was told years ago that factory alignment occurs while the chasis is upside down, thus there is no load on the suspension and the alignment can only be approximated. I don't know if this method is still used, or if Honda uses it.
I was told years ago that factory alignment occurs while the chasis is upside down, thus there is no load on the suspension and the alignment can only be approximated. I don't know if this method is still used, or if Honda uses it.
Thread
Thread Starter
Forum
Replies
Last Post