Vibration sound comming from passenger side of car
#12
Registered User
Thread Starter
Join Date: Feb 2004
Location: St. Augustine
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Markk,Feb 17 2006, 10:28 PM
One of my doors also rattled thanks to the lousy stereo installers at Pasadena Auto Sound. The crossover unit was just dangling inside the door.
#15
Registered User
Join Date: Sep 2003
Location: NJ USA
Posts: 2,516
Likes: 0
Received 0 Likes
on
0 Posts
hi all,
I just added to the old thread and hadn't seen this new one about the 6K plus vibration/rattle/noise on passenger side ....
here's what i posted there...
I found the source my vibration/noise at 6000+ RPM's !!!!
For me it seems that the passenger side door sill - was the cause... thus the sound as if it were coming from inside the door itself... the sill is held in place by three white clips... my sill had only 2 of the three clips - I re positioned the two clips from front 2 spaces to rear 2 spaces and voila!!! went out and hit VTEC in assorted gears and the noise above 6200RPM is gone! I will also put a piece of velcro?one side under the plastic sill so as to absorb any remaining vibration down the road
I just added to the old thread and hadn't seen this new one about the 6K plus vibration/rattle/noise on passenger side ....
here's what i posted there...
I found the source my vibration/noise at 6000+ RPM's !!!!
For me it seems that the passenger side door sill - was the cause... thus the sound as if it were coming from inside the door itself... the sill is held in place by three white clips... my sill had only 2 of the three clips - I re positioned the two clips from front 2 spaces to rear 2 spaces and voila!!! went out and hit VTEC in assorted gears and the noise above 6200RPM is gone! I will also put a piece of velcro?one side under the plastic sill so as to absorb any remaining vibration down the road
Thread
Thread Starter
Forum
Replies
Last Post