vibration sound at 6,200 RPMs or so...
#11
Registered User
Join Date: Sep 2003
Location: NJ USA
Posts: 2,516
Likes: 0
Received 0 Likes
on
0 Posts
I found the source my vibration/noise at 6000+ RPM's !!!!
For me it seems that the passenger side door sill - was the cause... thus the sound as if it were coming from inside the door itself... the sill is held in place by three white clips... my sill had only 2 of the three clips - I re positioned the two clips from front 2 spaces to rear 2 spaces and voila!!! went out and hit VTEC in assorted gears and the noise/vibration/rattle above 6000RPM is gone! I will also put a piece of velcro/one side under the plastic sill so as to absorb any remaining vibration down the road...
For me it seems that the passenger side door sill - was the cause... thus the sound as if it were coming from inside the door itself... the sill is held in place by three white clips... my sill had only 2 of the three clips - I re positioned the two clips from front 2 spaces to rear 2 spaces and voila!!! went out and hit VTEC in assorted gears and the noise/vibration/rattle above 6000RPM is gone! I will also put a piece of velcro/one side under the plastic sill so as to absorb any remaining vibration down the road...
Thread
Thread Starter
Forum
Replies
Last Post